欢迎来到深圳市山亚仪器仪表有限公司官方网站!
 
站点首页 | 设为主页 | 收藏本站
 
 
产品专区
 
 
 建筑无损检测仪器
 
 
 公路工程测试仪器
 
 
 交通工程检测仪器
 
 
 桩基工程检测仪器
 
 
 地下管道检测仪器
 
 
 油墨涂料检测仪器
 
 
 环境气体检测仪器
 
 
 电工电力检测仪器
 
 
品牌专区
 
 
 瑞士杰恩尔Zehntner
 
 
 英国易高Elcometer
 
 
 美国NDT James
 
 
 瑞士博势Proceq
 
 
 英国普洛蒂Protimeter
 
 
 爱尔兰Tramex
 
 
 美国费舍尔Fisher
 
 
 美国狄夫斯高DeFelsko
 
 
 美国Delmhorst
 
 
 美国达高特Dakota
 
 
 英国 GMI
 
 
 德国BYK
 
首页 >> 产品世界 >> 品牌专区 >> 美国NDT James >> 美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪
   
 
[美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪]
 
     
  名    称: 美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪
  型    号: P-C-7300 Bond Test MK III
  厂    家: 美国NDT JAMES
  用    途: 可由直接拉脱的方法量度混凝土、沥青、磁砖、混凝土收复或其他表面物料的粘力或拉力。
 
 
 
  详细介绍:    
 
    美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪可由直接拉脱的方法量度混凝土、沥青、磁砖、混凝土收复或其他表面物料的粘力或拉力。
 
The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. By pulling a 25mm steel disk attached to the material under the unit can,
  1. Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
  2. Determine the bond strength of a repair or overlay material after it is applied to the substrate
  3. Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface
The James Bond Tester™ MK III  has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.
  • Each System comes with 10, 50mm 2 inch, ASTM Standard 1583 - 04  stainless steel disks
  • Customers who purchase this may also need the T-M-170 or T-HT-1000 for substrate moisture testing

Features and Benefits

·         Accurate bond strength of repair mortars, epoxy resins, laminates, overlays, and other coatings.
·         Calibrated gauge with maximum load indicator and mechanical damping.
·         Ball Joint Design for rapid testing as well as assuring direct tensile loading
·         Adjustable alignment plate with built in leveling facility for both vertical and horizontal pulls.
·         Compact design.
·         Easy to use.
·         Standards
o    ISO 4624 Paints and varnishes -- Pull-off test for adhesion
o    EN 1015-12 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrate
o    EN 1348 Determination of Tensile Adhesion Strength for Cementitious Adhesives
o    BS 1881 Part 207 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests
o    ASTM C 1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
o    ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
o    ACI 503-30 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes
o    DIN 1048 Part 2 Testing concrete; testing of hardened concrete (specimens taken in situ)
Gauge Specifications
Range
Increments
Maximum Load Indicator
Mechanical Dampened Movement
Diameter
0.2 KN / 50 lbf
Yes
Yes
70 mm / 2.5"
1.0 KN / 200 lbf
Yes
Yes
70 mm / 2.5"
Diameter
Horizontal and Vertical Level
Easy Thumb Screw Adjustment Knobs
150 mm / 6"
Yes
Yes
Bond Test Puller Assembly
Diameter
Height
Maximum Load
60 mm / 2.5"
210mm / 8.125"
30 KN / 6675 lbf
Bond Test Assembly (Alignment Plate Attached to Bond Test Puller Assembly)
Height
Width
Weight
240 mm / 9.375"
3010 mm / 12.5"
5 Kg / 11 lbs.
James Bond Tester™ MK III in Case
Height
Width
Depth
Weight
410mm / 16"
508mm / 20"
205mm / 8"
14 Kg / 31 lbs
 
 
 
以上是美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪的详细信息,如果您对美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪价格、厂家、品牌、型号、图片、规范、规格、原理有疑问,或需要详细报价单、宣传册、中英文产品说明书,请点击我公司网站www.
 
美国NDT James相关产品介绍:
 
  资料下载:  
     
 
我需要“美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪”更详细的信息
 
姓名   * 姓名不能为空
公司   * 公司名称不能为空
电话   * 电话号不能为空,不少于7位数
E_mail  
留言  
验证码     
  
 
   
   
 
Copyright 2005~2012 深圳市山亚仪器仪表有限公司 All Rights Reserved 备案编号

一分彩票网站 tructony.com:粤ICP备12084842号

   
 

深圳市龙岗区坂田五和大道永香路八巷七号华熠科技大厦B805室 邮编:518131 电话:0755-23143789 传真:0755-28483941

 
 

 

   
友情链接:    中国官方彩票网址   中国官方彩票网址   VR竞速彩票开奖网   VR竞速彩票注册   中国官方彩票网址